&

加入購物車成功！

產品名稱：High temperature resistant cable KFGRP
瀏覽：
添加時間：2024-06-21 16:28:49
推薦度：

介紹：

KFGR耐高溫電纜用于交流額定電壓450/750V及以下控制、監控回路以及電器儀表的連接線和自動控制系統的傳輸線。

KFGR high-temperature resistant cables are used for control and monitoring circuits with rated AC voltage of 450/750V and below, as well as connection lines for electrical instruments and transmission lines for automatic control systems.

產品具有耐油、防水、耐磨、耐酸堿及各種化學試劑（除氯仿外）和各種腐蝕性氣體、耐老化、不燃燒等性能；

The product has properties such as oil resistance, water resistance, wear resistance, acid and alkali resistance, as well as various chemical reagents (except chloroform) and corrosive gases, aging resistance, and non combustion;

本產品主要適用于冶金、電力、化工、石油等工礦企業在高溫、低溫及各種惡劣環境中作電器、儀表的連接線和自動控制系統的傳輸線。

This product is mainly suitable for metallurgical, power, chemical, petroleum and other industrial and mining enterprises to use as the connection line for electrical appliances and instruments, as well as the transmission line for automatic control systems in high temperature, low temperature and various harsh environments.

KFGR耐高溫電纜型號說明

KFGR High Temperature Resistant Cable Model Description

KFF

氟塑料絕緣氟塑料護套控制電纜

Fluoroplastic insulated fluoroplastic sheathed control cable

KFFP

氟塑料絕緣氟塑料護套銅絲編織屏蔽控制電纜

Fluoroplastic insulated fluoroplastic sheathed copper wire braided shielded control cable

KFFR

氟塑料絕緣氟塑料護套控制軟電纜

Fluorine plastic insulated and fluorine plastic sheathed control flexible cables

KFFRP

氟塑料絕緣氟塑料護套銅絲編織屏蔽控制軟電纜

Fluoroplastic insulated fluoroplastic sheathed copper wire braided shielded control flexible cable

KFV

氟塑料絕緣聚氯乙烯護套控制電纜

Fluoroplastic insulated PVC sheathed control cable

KFVP

氟塑料絕緣聚氯乙烯護套銅絲編織屏蔽控制電纜

Fluoroplastic insulated PVC sheathed copper wire braided shielded control cable

KFVR

氟塑料絕緣聚氯乙烯護套控制軟電纜

Fluoroplastic insulated PVC sheathed control flexible cable

KFVRP

氟塑料絕緣聚氯乙烯護套銅絲編織屏蔽控制軟電纜

Fluoroplastic insulated PVC sheathed copper wire braided shielded control flexible cable

KFV22

氟塑料絕緣鋼帶鎧裝聚氯乙烯護套控制電纜

Fluoroplastic insulated steel strip armored polyvinyl chloride sheathed control cable

KFVP22

氟塑料絕緣鋼帶鎧裝聚氯乙烯護套銅絲編織屏蔽控制電纜

Fluoroplastic insulated steel strip armored polyvinyl chloride sheathed copper wire braided shielded control cable

KFVR22

氟塑料絕緣鋼帶鎧裝聚氯乙烯護套控制軟電纜

Fluorine plastic insulated steel strip armored PVC sheathed control flexible cable

KFVRP22

氟塑料絕緣鋼帶鎧裝聚氯乙烯護套銅絲編織屏蔽控制軟電纜

Fluoroplastic insulated steel strip armored PVC sheathed copper wire braided shielded control flexible cable

KFG

氟塑料絕緣硅橡皮護套控制電纜

Fluoroplastic insulated silicone rubber sheathed control cable

KFGP

氟塑料絕緣硅橡皮護套銅絲編織屏蔽控制電纜

Fluoroplastic insulated silicone rubber sheathed copper wire braided shielded control cable

KFGR

氟塑料絕緣硅橡皮護套控制軟電纜

Fluoroplastic insulated silicone rubber sheathed control flexible cable

KFGRP

氟塑料絕緣硅橡皮護套銅絲編織屏蔽控制軟電纜

Fluoroplastic insulated silicone rubber sheathed copper wire braided shielded control flexible cable

KFG22

氟塑料絕緣鋼帶鎧裝硅橡皮護套控制電纜

Fluoroplastic insulated steel strip armored silicone rubber sheathed control cable

KFGR耐高溫電纜產品使用特性

Usage characteristics of KFGR high-temperature resistant cable products

1、交流額定電壓： U0/U為450/750V；

1. AC rated voltage: U0/U is 450/750V;

2、電纜的敷設溫度應不低于：聚氯乙烯護套電纜0℃；硅橡皮護套電纜-20 ℃；氟塑料護套電纜-20℃。

2. The laying temperature of cables should not be lower than 0 ℃ for PVC sheathed cables; Silicone rubber sheathed cable -20 ℃; Fluoroplastic sheathed cable -20 ℃.

3、電纜導體長期允許工作溫度為：氟塑料外護層為200℃/260℃；聚氯乙烯外護層為105℃；硅橡皮外護層為180℃。

3. The long-term allowable working temperature for cable conductors is: the outer protective layer of fluoroplastic is 200 ℃/260 ℃; The PVC outer protective layer is 105 ℃; The outer protective layer of silicone rubber is 180 ℃.

4、電纜推薦允許彎曲半徑：無鎧裝層的電纜,應不小于電纜外徑的6倍；有鎧裝層的電纜或帶銅帶屏蔽結構的電纜,應不小于電纜外徑的12倍；有屏蔽層結構的軟電纜,應不小于電纜外徑的6倍；氟塑料絕緣護套材料的電纜應不小于電纜外徑的8倍。

4. Recommended allowable bending radius for cables: for cables without armor layer, it should not be less than 6 times the outer diameter of the cable; Cables with armor layer or cables with copper tape shielding structure should not be less than 12 times the outer diameter of the cable; Soft cables with a shielding layer structure should not be less than 6 times the outer diameter of the cable; The cable made of fluoroplastic insulation sheath material should not be less than 8 times the outer diameter of the cable.